Jumat, 29 Oktober 2010

Get an error 21000068 when resetting your Epson T50 or Epson T60 and not see  any solution to prevent the problem. Why not try this tips, but reset this method not recommended for beginner user and you must understand what you are doing. These tips from Jagdish Rathore (India) and I have been granted permission to publish on this blog. He also has been publishing this reset method on his blog on:
http://www.epsonservice.blog.com/. If you do not have any knowledge about PCB and electronics, I recommend don’t try this reset methode.
  1. Open your Epson main PCB board.  You can view an 8 pin CMOS IC.  That is Epson waste ink counter IC and found on all Epson Printer.
    step 1 T50 -T60 resetting
  2. You can reset your printer without any resetter by following these ways.
  3. Soldering pin no 1,2,3,4 by wire  as show in PICTURE and now turn on printer for ”20 second”
    step 2 T50 -T60 resetting
  4. After 20 second turn off printer  and remove soldering wire from pin no. 1,2,3,4 ( back in original condition)
  5. Now turn on your printer
  6. And now your printer will be RESET
Note: This method is not recommended for beginners so you have to understand what you are doing. All problem caused by this tutorials is not our responsibility. Use this tutorial as your own risk.

0 comments:

Posting Komentar

Arsip Blog

Visitor

Popular Posts

Donate To Me On Paypal

https://www.paypal.me/riyanto1971